SmartMX P5CD012 CPU chip cards
CMOS14 SmartMX family properties
The long-established CMOS14 SmartMX family features a significantly enhanced secure smart card IC architecture. Extended instructions for Java and C code, linear addressing, high speed at low power and a universal memory management unit are among many other improvements added to the classic 80C51 core architecture. The technology transfer step from 5-metal layer 0.18 μm to 5-metal layer 0.14 μm CMOS technology offers more advantages in terms of security features, memory resources, crypto coprocessor calculation speed for RSA and ECC as well as availability of secure hardware support for 2-key and 3-key Digital Encryption Standard (DES) and Advanced Encryption Standard (AES) operations.
The contact interface availability, the optional contactless interface and the optional S²C interface enable the easy implementation of native or open platform and multi-application operating systems in market segments such as banking, E-passports, ID cards, Health cards, secure access, Java cards, Near Field Communication (NFC) connectable mobile hand sets as well as Trusted Platform Modules (TPM).
Triple-DES coprocessor
The DES widely used for symmetric encryption is supported by a dedicated, high performance, highly attack-resistant hardware coprocessor. Single DES and triple-DES, based on two or three DES keys, can be executed within less than 40 μs. Relevant standards (ISO/IEC, ANSI, FIPS) and Message Authentication Code (MAC) are fully supported. A secure crypto library element for DES is available.
AES coprocessor
SmartMX is the first smart card microcontroller platform to provide a dedicated high performance 128-bit parallel processing coprocessor to support secure AES. The implementation is based on FIPS197 as standardized by the National Institute for Standards and Technology (NIST), and supports key lengths of 128-bit, 192-bit, and256-bit with performance levels comparable to DES. AES is the next generation for symmetric data encryption and recommended successor to DES providing a significantly improved security level. A secure crypto library element for AES is available.
Security features
SmartMX incorporates a wide range of both inherent and OS-controlled security features as countermeasure against all types of attack. Semiconductors apply their extensive knowledge of chip security, combined with handshaking circuit technology, very dense 5-metal layer 0.14 µm technology, glue logic and active shielding methodology for optimum results in CC EAL5+, EMVCo and other third-party certifications and approvals.
SmartMX Memory Management Unit (MMU), designed to define various memory segments and assign security attributes accordingly, supports a strong firewall concept that keeps different applications separate from each other. Only the System mode has full access privileges to all memory space and on-chip peripherals, in User mode the privileges are limited. User mode restrictions are configurable by software running in System mode.
The SmartMX security features are acknowledged as having outstanding properties by most Semiconductors’ customers. The countermeasures against light attacks are regarded as “best-in-class”.
Security evaluation and certificates
Hardware security certification in accordance with CC EAL5+ is attained. Also, third-party approval such as EMVCo (VISA, CAST), ZKA and others, depending on the application requirements, are available.
Parameters:
Chip: SmartMX P5CD012
Cards size:85.5×54×0.84mm,or customer specified size
Induction distance:2cm-10cm
Materials:PVC/PET/PETG/ABS/PHA,0.13 copper wire
EEPROM: 12KB
Endurance: > 500,000 times
Data retention time: > 25 years
Ambient temperature: -25℃-+85℃
CIU fully compatible with ISO/IEC 14443A
13.56 MHz operating frequency
fully supports the T=CL protocol in accordance with ISO/IEC 14443-4
supported data transfer rates: 106 kbit/s, 212 kbit/s, 424 kbit/s and 848 kbit/s
reader infrastructure compatibility via optional 1K or 4K emulation including built-in anticollision support
Two additional I/O ports: IO2 and IO3 for full-duplex serial data communication
P5CN080 and P5CN144 S²C interface
One additional I/O port: IO2 for full-duplex serial data communication
Security features
Enhanced security sensors: Low and high clock frequency sensor
Low and high temperature sensor
Low and high supply voltage sensor
Single Fault Injection (SFI) attack detection
Light sensors (included integrated memory light sensor functionality)
Electronic fuses for safeguarded mode control
Active shielding
Unique ID for each die
Clock input filter for protection against spikes
Power-up and power-down reset
Optional programmable card disable feature
Memory security (encryption and physical measures) for RAM, EEPROM and ROM
Memory Management Unit (MMU) including memory protection: Secure multi-application operating systems via two different operation modes: System mode and User mode
OS-controlled access restriction mechanism to peripherals in User mode
Memory mapping up to 8 MB code memory
Memory mapping up to 8 MB (64-kbit) data memory
Optional disabling of ROM read instructions by code executed in EEPROM
Optional disabling of any code execution out of RAM
EEPROM programming:
No external clock
Hardware sequencer controlled
On-chip high voltage generation
Enhanced error correction mechanism
64 B or 128 B EEPROM for customer-defined security FabKey, featuring batch-, wafer- or die-individual security data, included encrypted diversification features on request
14 B user write-protected security area in EEPROM (byte access, inhibit functionality per byte)
32 B write-once security area in EEPROM (bit access)
32 B user read-only area in EEPROM (byte access)
Customer-specific EEPROM initialization available
Design-in support
Approved development tool chain: Keil PK51 development tool package including µVision3/dScope C51 simulator, additional specific hardware drivers including simulation of contactless interface and ISO/IEC 7816 card interface board. A SmartMX DBox allows software debugging and integration tests.
Ashling Ultra-Emulator platform, stand-alone ROM prototyping boards and ISO/IEC 7816 and ISO/IEC 14443 card interface board. Code coverage and performance measurement software tools for real-time software testing.
Dual interface dummy modules OM6711 (PDM 1.1 - SOT658) with special antenna bonding on C4 and C8 for testing the implanting process and antenna connection.
Tutorial C source libraries for: contactless communication in accordance with ISO/IEC 14443, Part 3 and 4
T = 1 communication in accordance with ISO/IEC 7816, Part 3
EEPROM Read/Write routines
200 KB user ROM
6144 B RAM
High-performance secure Public Key Infrastructure (PKI) coprocessor (RSA, ECC)
Secure dual/triple-DES coprocessor
Secure AES coprocessor
Memory Management Unit (MMU)
ISO/IEC 7816 contact interface
Optional ISO/IEC 14443 A Contactless Interface Unit (CIU)
Optional S²C interface for NFC communication link
5-metal layer 0.14 µm CMOS technology
Optional certified crypto library modules for RSA, ECC, DES, AES, SHA and PRNG
Application areas: Banking,Java cards,E-passports,ID cards,Secure access,Trusted platform modules.Even can realize a card can go through access cash, transfer and settlement currency, shopping consumption, such as financial business, and can be applied to public transport, taxis, highway, tourism, Residential water, electricity, gas and other micro-payment fee.
Aviable Crafts
Printing: Offset Printing,Silkscreen Printing,Thermal printing,Ink-jet printing,Digital printing.
Security features: Laser ablation,Hologram/OVD,UV ink,Optical Variable ink,Hidden barcode/Barcode mask,Graded Rainbow,Micro-text.
Others: Signature panel,Barcode,Serial number,Embossing,Encoding,Die-cut.
Download SmartMX P5CD012 CPU chips information :
|
|
SmartMX P5CD012 CPU chip cards Images
|
